After installation use only Neutral Silicon A silicone with no ACID.Don’t pull together the busbar wire as it causes a shortcut! The busbar is easy to pull separate with the FILM or glass!.The electrical contact strip (“Busbar”) or the FILM edges should NEVER be in contact with the metal frame.Each transformer covers different area depends on its Watt parameter. Use 65V AC power to the FILM with our transformer or other certified transformer.Handle the Smart FILM at the edges to avoid separating layers prematurely.You may wear nitrile gloves during installation remove the adhesive side of the protective layer before starting the installation.The Smart FILM’s protective layer of the non-adhesive side should be kept on the installation until the installation process is completely finished.
When measuring the outer dimensions, the Smart FILM should be 2-3mm shorter than the glass area.Keep your working environment as clean and dust-free as possible for optimal results.DO NOT start installation until it is 100% dry! The alcohol should be sprayed lightly as an install aid only. Not on PC or plastic.ĭO NOT use water under any circumstances – self-adhesive can be installed using 99% isopropyl alcohol (medical alcohol) only.
Don’t let the FILM fold in any way, that will severely damage the Film.Īdhesive privacy film should be stick on glass only.
0 kommentar(er)
